Marking and engraving machine
Pneumatic engraving machine is digitally controlled and perfectly suits for marking (engraving) singles and batch workpieces. Engraving is simple in use and provides all necessary marking (engraving) functions. A microstrike engraving technology with single pen is used for marking plain, irregular and rough surfaces. Solid and soft materials can be engraved (marked) on the same equipment with no need to change it. Engraving machine uses “ADVANTECH” industrial computer.
Pneumatic engraving machine for cylindrical surfaces
Engraved surface dimension (mm): 100x50
Engraved piece height (mm): up to 215
Table work area dimensions (mm): 300x215
Engraving depth of soft materials (mm): up to 1
Engraving depth of tampered steel (HRC 50) (mm): 0.15
Engraving rate (mm/min): 0…2000
Tool vibration frequency with air pressure 6 kg/cm2 (Hz): 250
Working pressure of supplied compressed air, kg/cm2: 3…6
Preparation grade of supplied compressed air GOST 14266-82
Electric supply:
- supply voltage (V): 220
- supply frequency (Hz): 50
- current consumption (A): 0.13
System dimensions (mm): 300х300х460
Mechanical engraving unit: 205x110x215
Control unit
Weight (kg): 37.5
Pneumatic engraving machine for flat surface of pieces
Engraved surface dimension (mm): 100x100
Engraved piece height (mm): up to 215
Table work area dimensions (mm): 300x215
Engraving depth of soft materials (mm): up to 1
Engraving depth of tampered steel (HRC 50) (mm): 0.15
Engraving rate (mm/min): 0…2000
Tool vibration frequency with air pressure 6 kg/cm2 (Hz): 250
Working pressure of supplied compressed air (kg/cm2): 3…6
Preparation grade of supplied compressed air GOST 14266-82
Electric supply:
- supply voltage (V): 220
- supply frequency (Hz): 50
- current consumption (A): 0.13
System dimensions (mm): 300х300х460
Mechanical engraving unit: 205x110x215
Control unit
Weight (kg): 37.5
Pneumatic engraving machine UPGP-250
Engraved surface dimension (mm): 100x50
Engraved piece heigh (mm): no limits
Engraving depth of soft materials (mm): up to 1
Engraving depth of tampered steel (HRC 50) (mm): 0.15
Engraving rate (mm/min): 0…2000
Tool vibration frequency with air pressure 3.5 kg/cm2 (Hz): min 250
Working pressure of supplied compressed air (kg/cm2): 4…6
Preparation grade of supplied compressed air GOST 14266-82
Electric supply:
- supply voltage (V): 220
- supply frequency (Hz): 50
- current consumption (A): 0.13
System dimensions (mm): 190х410х210
Control unit (mm): 300x80x220
Weight (kg): 4.5
