Feeders for process compositions
Pneumatic feeders are used for dosed application of different process liquids (glue, hermetic, compound, varnish, flux, paste, grease, oil) to the product in form of points, lines, ropes and to fill cavities in assembly, pasting, hermetic sealing, locking, soldering, packing operations.
Modern design, quick unions of gun, pedal and tweezer to the feeder, and from feeder to pneumatic circuit make operations more comfortable.
Feeder DRP
Air pressure (MPa or kgf/cm2): 0.4…0.6 (4-6)
Operation: manual
Tank volume (l): 0.8
Dimensions (mm): 280x155x240
Weight (kg): 4
Feeder to deliver consistent grease to the product UDP-10
Tank capacity (l): 10
Impulse (ml): 0-100
Power supply: pneumatic circuit 0.4-0.6 MPa (4-6 kgf/cm2)
Dose forming: automatic
Feeder to deliver consistent grease to the product UDP-4
Dose dispensed per stroke (ml): 0…300
Max plunger stroke (mm): 155
Plunger diameter (mm): 50
Tank volume (l): 20
Feeder inlet air pressure (MPa or kgf/cm2): 0.4-0.6 (4-6)
Oil cavity pressure (MPa (kgf/cm2)): 6 (60)
Feeder to deliver consistent grease to the product UDP-5
Tank capacity (l): 5
Impulse (ml): 0-100
Power supply: pneumatic circuit 0.4-0.6 MPa (4-6 kgf/cm2)
Dose forming: automatic
Pneumatic feeder
Maximum viscosity (Pa.s): 250
Error: ± 3%
Minimum dose (mg): 10 (for sealant materials)
Operating mode: semiautomatic and manual
Power supply: shop pneumatic circuit 6 kgf/cm
Control system: pneumatic
Gun capacity (ml): 10, 20, 50, 100, 200
Tank capacity (l): 3
Feeder dimensions (mm): 230х220х60
Weight (kg): 3
Pneumatic feeder to deliver small grease doses
Min grase dose: dose with diameter 0.2…0.3 mm
Gun volume (ml): 200 (or 100)
Control system: pneumatic with elements of universal system of industrial pneumatic controls and CYCLE
Operating mode: semiautomatic by pedal or button activation
Supply: pressure air (shop pneumatic circuit or compressor)
Feeder inlet air pressure (MPa or kgf/cm2): 0.4-0.6 (4-6)
Control unit dimensions (mm): 260x230x80
Pneumatic guns
Hand gun (ml): 100, 200, 300
Material: polypropylene, polytetrafluorethylene
Supply (kgf/cm2): pneumatic circuit 4-6
Pneumoeletric feeder
Maximum viscosity (Pa.s): 250
Error: ± 3%
Minimum dose (mg): 10 (for sealant materials)
Operating mode: semiautomatic and manual
Power supply: shop pneumatic circuit 6 kgf/cm and industrial network 220V, 50Hz
Control system: microprocessor-based
Gun capacity (ml): 10, 20, 50, 100, 200
Tank capacity (l): 3
Feeder dimensions (mm): 230х220х60
Weight (kg): 3
Sealant filling machine to apply "Loctite 5061" sealant to fasteners
Power supply: electrical grid 220V, 50Hz
Pneumatic circuit (MPa or kgf/cm): 0.6 (6.0)
Control system: microprocessor-based
Max regulated pressure delivered from operation panel to the sealant tank (MPa or kgf/cm): 0.35 (3.5)
Operating mode: semiautomatic
Rated variable speed of the component (rps): 2
Component cycle time (s): 5…10
Sealant tank effective volume (l): 5
Sealant filling machine UNG-2
Purpose: coating threaded pieces with sealant
Pieces dimensions are specified by user
Sealant supply: dosed
Dose forming: automatic
Operating mode: semiautomatic or manual
Maximum viscosity (Pa.s): 150
Air impact control range (s): 0.1-99.0
Dimensions with worktable A*B*H (mm): 1200*700*1350
Supply voltage (V): 220
Air pressure in shop pneumatic circuit (MPa or kgf/cm2): min 0.4 (4)
Operating mode: double-shifted (8 hours each)
Efficiency (pcs/hour): 700-800
Maintenance staff: one person
Part setting and removal: manual
Number of spindles: 2
Sealant tank capacity (l)*: 5
* Capacity can be increased.
